Sonoprocessing enhances the stabilization of fisetin by encapsulation in Saccharomyces cerevisiae cells / El sonoprocesamiento mejora la estabilización de fisetina mediante encapsulación en células de Saccharomyces cerevisiae

The objective of this study was to investigate for the first time the role of S. cerevisiae natural barriers and endogenous cytoplasmatic bodies on the stabilization of fisetin encapsulated via sonoprocessing coupled to freeze-drying (FD) or spray drying (SD). Both protocols of encapsulation improved the resistance of fisetin against thermal treatments (between 60 and 150 °C) and photochemical-induced deterioration (light exposition for 60 days) compared to non-encapsulated fisetin (antioxidant activity retention of approximately 55% and 90%, respectively). When stored under constant relative humidity (from 32.8 to 90%) for 60 days, yeast carriers improved the half-life time of fisetin by up to 4-fold. Spray dried particles were smaller (4.9 μm) and showed higher fisetin release after simulated gastrointestinal digestion (55.7%) when compared to FD. Freeze-dried particles, in turn, tended to agglomerate more than SD (zeta potential −19.7 mV), resulting in reduced loading features (6.3 mg/g) and less efficient protection of fisetin to heat, photo, and moisture-induced deterioration. Overall, spray-dried sonoprocessed fisetin capsules are an efficient way to preserve fisetin against harsh conditions. Altogether, this report shows that sonoprocessing coupled to drying is an efficient, creative, and straightforward route to protect and deliver lipophilic fisetin using yeast capsules for food applications.(AU)

Faecalibacterium duncaniae A2-165 regulates the expression of butyrate synthesis, ferrous iron uptake, and stress-response genes based on acetate consumption.

The promising next-generation probiotic Faecalibacterium prausnitzii is one of the most abundant acetate-consuming, butyrate-producing bacteria in the healthy human gut. Yet, little is known about how acetate availability affects this bacterium's gene expression strategies. Here, we investigated the effect of acetate on temporal changes in the transcriptome of F. duncaniae A2-165 cultures using RNA sequencing. We compared gene expression patterns between two growth phases (early stationary vs. late exponential) and two acetate levels (low: 3 mM vs. high: 23 mM). Only in low-acetate conditions, a general stress response was activated. In high-acetate conditions, there was greater expression of genes related to butyrate synthesis and to the importation of B vitamins and iron. Specifically, expression was strongly activated in the case of the feoAABC operon, which encodes a FeoB ferrous iron transporter, but not in the case of the feoAB gene, which encodes a second putative FeoAB transporter. Moreover, excess ferrous iron repressed feoB expression but not feoAB. Lastly, FeoB but not FeoAB peptides from strain A2-165 were found in abundance in a healthy human fecal metaproteome. In conclusion, we characterized two early-stationary transcriptomes based on acetate consumption and this work highlights the regulation of feoB expression in F. duncaniae A2-165.

Sonoprocessing enhances the stabilization of fisetin by encapsulation in Saccharomyces cerevisiae cells.

The objective of this study was to investigate for the first time the role of S. cerevisiae natural barriers and endogenous cytoplasmatic bodies on the stabilization of fisetin encapsulated via sonoprocessing coupled to freeze-drying (FD) or spray drying (SD). Both protocols of encapsulation improved the resistance of fisetin against thermal treatments (between 60 and 150 °C) and photochemical-induced deterioration (light exposition for 60 days) compared to non-encapsulated fisetin (antioxidant activity retention of approximately 55% and 90%, respectively). When stored under constant relative humidity (from 32.8 to 90%) for 60 days, yeast carriers improved the half-life time of fisetin by up to 4-fold. Spray dried particles were smaller (4.9 µm) and showed higher fisetin release after simulated gastrointestinal digestion (55.7%) when compared to FD. Freeze-dried particles, in turn, tended to agglomerate more than SD (zeta potential -19.7 mV), resulting in reduced loading features (6.3 mg/g) and less efficient protection of fisetin to heat, photo, and moisture-induced deterioration. Overall, spray-dried sonoprocessed fisetin capsules are an efficient way to preserve fisetin against harsh conditions. Altogether, this report shows that sonoprocessing coupled to drying is an efficient, creative, and straightforward route to protect and deliver lipophilic fisetin using yeast capsules for food applications.

The Yin-Yang of the Green Fluorescent Protein: Impact on Saccharomyces cerevisiae stress resistance.

Although fluorescent proteins are widely used as biomarkers (Yin), no study focuses on their influence on the microbial stress response. Here, the Green Fluorescent Protein (GFP) was fused to two proteins of interest in Saccharomyces cerevisiae. Pab1p and Sur7p, respectively involved in stress granules structure and in Can1 membrane domains. These were chosen since questions remain regarding the understanding of the behavior of S. cerevisiae facing different heat kinetics or oxidative stresses. The main results showed that Pab1p-GFP fluorescent mutant displayed a higher resistance than that of the wild type under a heat shock. Moreover, fluorescent mutants exposed to oxidative stresses displayed changes in the cultivability compared to the wild type strain. In silico approaches showed that the presence of the GFP did not influence the structure and so the functionality of the tagged proteins meaning that changes in yeast resistance were certainly related to GFP ROS-scavenging ability (Yang).

Sonoprocessing is an effective strategy to encapsulate fisetin into Saccharomyces cerevisiae cells.

The encapsulation of fisetin into S. cerevisiae cells through sonoporation coupled with drying is reported for the first time in the literature. To establish the best conditions to maximize the amount of internalized fisetin, the cell density (5-10% w/v), fisetin concentration (1-3 mg/mL), acoustic energy density (0-333.3 W/L), and drying method (freeze-drying and spray drying) were analyzed through a Box-Behnken experimental design (BBD) coupled with response surface methodology (RSM). Higher encapsulation efficiency (EE) was achieved with a cell density of 10% w/v, while fisetin concentration of 3 mg/mL favored the encapsulation yield (EY) and antioxidant activity (AA). Higher EE (67.7%), EY (25.7 mg/g), and AA (90%) were registered when an acoustic density of 333.3 W/L was used. Furthermore, both drying protocols promoted fisetin encapsulation, but through spray drying, the EE, EY, and AA were 11.5%, 11.1%, and 26.6% higher than via freeze-drying, respectively. This work proved that fully filled biocapsules were produced through sonoprocessing, and their morphology was influenced by the acoustic energy and drying process. Overall, these results open new perspectives for the application of sonoprocessing-assisted encapsulation, paving the way for developing innovative yeast-based delivery systems for lipophilic compounds such as fisetin. KEY POINTS: • Sonoprocessing improves the encapsulation of fisetin into S. cerevisiae cells • Spray drying promotes fisetin loading into yeasts' intracellular space and cavities • Fisetin binding with yeast extracellular agents are favored by freeze-drying.

Comprehensive approach to the protection and controlled release of extremely oxygen sensitive probiotics using edible polysaccharide-based coatings.

The human intestinal system is a complex of various anaerobes including extremely oxygen-sensitive (EOS) bacteria, some of which have been credited with significant health benefits. Among these, Faecalibacterium prausnitzii, which is one of the most abundant anaerobic bacterial strains in the human intestinal tract, has been proved to be a promising probiotic for the treatment of inflammatory bowel diseases. However, because of its extremely sensitive nature, there are many difficulties when passing through the harsh environment of the gastrointestinal tract. Hence, in this study, a comprehensive physicochemical characterization was performed for the use of polysaccharides from several origins (hydroxypropyl methyl cellulose, methyl cellulose, hydroxypropyl cellulose, chitosan, low-methoxylated pectin, kappa-carrageenan, sodium alginate and pullulan) as encapsulating agents to protect and deliver this bacterium. First, the apparent viscosity and surface tension of the polymer solutions were tested. Then, the mechanical properties, water vapor and oxygen barrier properties of these biopolymers as self-standing films were investigated. Lastly, in vitro release profiles of small molecules and bacterial cells from these biopolymer matrices in contact with a simulated gastrointestinal tract were evaluated. The results showed that chitosan, low-methoxylated pectin, kappa-carrageenan, sodium alginate and pullulan films exhibited good oxygen barrier properties to protect EOS probiotics. Among all the biopolymers tested, sodium alginate exhibited the best oxygen barrier properties and release profile. The release kinetics can be modulated by several factors including biopolymer type, plasticizer concentration and active molecules or bacteria to be encapsulated. On that basis and integrating the other parameters analyzed, a multicriteria strategy for probiotic encapsulation was proposed.

Description of a Newly Isolated Blautia faecis Strain and Its Benefit in Mouse Models of Post-Influenza Secondary Enteric and Pulmonary Infections.

The expanding knowledge on the systemic influence of the human microbiome suggests that fecal samples are underexploited sources of new beneficial strains for extra-intestinal health. We have recently shown that acetate, a main circulating microbiota-derived molecule, reduces the deleterious effects of pulmonary Streptococcus pneumoniae and enteric Salmonella enterica serovar Typhimurium bacterial post-influenza superinfections. Considering the beneficial and broad effects of acetate, we intended to isolate a commensal strain, producing acetate and potentially exploitable in the context of respiratory infections. We designed successive steps to select intestinal commensals that are extremely oxygen-sensitive, cultivable after a freezing process, without a proinflammatory effect on IL-8 induction, and producing acetate. We have identified the Blautia faecis DSM33383 strain, which decreased the TNFα-induced production of IL-8 by the intestinal epithelial cell line HT-29. The beneficial effect of this bacterial strain was further studied in two preclinical models of post-influenza Streptococcus pneumoniae (S.p) and Salmonella enterica serovar Typhimurium (S.t) superinfection. The intragastrical administration of Blautia faecis DSM33383 led to protection in influenza-infected mice suffering from an S.p. and, to a lesser extent, from an S.t secondary infection. Altogether, this study showed that Blautia faecis DSM33383 could be a promising candidate for preventive management of respiratory infectious diseases.

Osmoporation is a versatile technique to encapsulate fisetin using the probiotic bacteria Lactobacillus acidophilus.

The objective of this study was to evaluate the performance of Lactobacillus acidophilus cells as a novel encapsulating carrier for fisetin via osmoporation. Initially, the effects of osmotic pressure and initial fisetin concentration on the performance of the osmoporation process were evaluated. The best results were achieved when 15 MPa was applied, while the maximum loading capacity was reached when fisetin concentration of 2.0 mg·mL-1 was used. For these conditions, the cell viability, encapsulation efficiency (EE), and encapsulated fisetin content (EF) were 72%, 28%, and 0.990 mg, respectively. Further, the encapsulation was confirmed by Fourier transform-infrared (FT-IR), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) analysis. DSC thermograms revealed an increase of 40 °C in the melting point of fisetin after encapsulation. In addition, the enhancement of fisetin bioaccessibility by osmoporated biocapsules is shown for the first time in the literature. When the fisetin biocapsules were subjected to in vitro gastrointestinal digestion, 99.6% of the encapsulated content were retained through the gastric stage and 45.5% were released during the intestinal stage, despite no active cells were detected during simulated digestion. These results suggest that alive cells are required for an effective osmoporation-assisted encapsulation process; however, osmoporated biocapsules can efficiently protect and preserve labile compounds, independently of their activity. Overall, this study demonstrated that osmoporation using probiotic L. acidophilus is a simple, versatile, and efficient technique to encapsulate and deliver lipophilic fisetin for food applications. KEY POINTS : •Fisetin is efficiently encapsulated into L. acidophilus via osmoporation. •Fisetin bioaccessibility is improved by osmoporation into L. acidophilus. •Release mechanisms of osmoporation carriers are independent of the cell activity.

Ultra-high irradiance (UHI) blue light: highlighting the potential of a novel LED-based device for short antifungal treatments of food contact surfaces.

Microbial food spoilage is an important cause of health and economic issues and can occur via resilient contamination of food surfaces. Novel technologies, such as the use of visible light, have seen the light of day to overcome the drawbacks associated with surface disinfection treatments. However, most studies report that photo-inactivation of microorganisms with visible light requires long time treatments. In the present study, a novel light electroluminescent diode (LED)-based device was designed to generate irradiation at an ultra-high power density (901.1 mW/cm2). The efficacy of this technology was investigated with the inactivation of the yeast S. cerevisiae. Short-time treatments (below 10 min) at 405 nm induced a ~4.5 log reduction rate of the cultivable yeast population. The rate of inactivation was positively correlated to the overall energy received by the sample and, at a similar energy, to the power density dispatched by the lamp. A successful disinfection of several food contact surfaces (stainless steel, glass, polypropylene, polyethylene) was achieved as S. cerevisiae was completely inactivated within 5 min of treatments. The disinfection of stainless steel was particularly effective with a complete inactivation of the yeast after 2 min of treatment. This ultra-high irradiance technology could represent a novel cost- and time-effective candidate for microbial inactivation of food surfaces. These treatments could see applications beyond the food industry, in segments such as healthcare or public transport. KEY POINTS : • A novel LED-based device was designed to emit ultra-high irradiance blue light • Short time treatments induced high rate of inhibition of S. cerevisiae • Multiple food contact surfaces were entirely disinfected with 5-min treatments.

Design of a new lyoprotectant increasing freeze-dried Lactobacillus strain survival to long-term storage.

BACKGROUND: Stabilization of freeze-dried lactic acid bacteria during long-term storage is challenging for the food industry. Water activity of the lyophilizates is clearly related to the water availability and maintaining a low aw during storage allows to increase bacteria viability. The aim of this study was to achieve a low water activity after freeze-drying and subsequently during long-term storage through the design of a lyoprotectant. Indeed, for the same water content as sucrose (commonly used lyoprotectant), water activity is lower for some components such as whey, micellar casein or inulin. We hypothesized that the addition of these components in a lyoprotectant, with a higher bound water content than sucrose would improve lactobacilli strains survival to long-term storage. Therefore, in this study, 5% whey (w/v), 5% micellar casein (w/v) or 5% inulin (w/v) were added to a 5% sucrose solution (w/v) and compared with a lyoprotectant only composed of 5% sucrose (w/v). Protective effect of the four lyoprotectants was assessed measuring Lactiplantibacillus plantarum CNCM I-4459 survival and water activity after freeze-drying and during 9 months storage at 25 °C. RESULTS: The addition whey and inulin were not effective in increasing Lactiplantibacillus plantarum CNCM I-4459 survival to long-term-storage (4 log reduction at 9 months storage). However, the addition of micellar casein to sucrose increased drastically the protective effect of the lyoprotectant (3.6 log i.e. 0.4 log reduction at 9 months storage). Comparing to a lyoprotectant containing whey or inulin, a lyoprotectant containing micellar casein resulted in a lower water activity after freeze-drying and its maintenance during storage (0.13 ± 0.05). CONCLUSIONS: The addition of micellar casein to a sucrose solution, contrary to the addition of whey and inulin, resulted in a higher bacterial viability to long-term storage. Indeed, for the same water content as the others lyoprotectants, a significant lower water activity was obtained with micellar casein during storage. Probably due to high bound water content of micellar casein, less water could be available for chemical degradation reactions, responsible for bacterial damages during long-term storage. Therefore, the addition of this component to a sucrose solution could be an effective strategy for dried bacteria stabilization during long-term storage.

Management of Listeria monocytogenes on Surfaces via Relative Air Humidity: Key Role of Cell Envelope.

Although relative air humidity (RH) strongly influences microbial survival, its use for fighting surface pathogens in the food industry has been inadequately considered. We asked whether RH control could destroy Listeria monocytogenes EGDe by envelope damage. The impact of dehydration in phosphate-buffered saline (PBS) at 75%, 68%, 43% and 11% RH on the bacterial envelope was investigated using flow cytometry and atomic force microscopy. Changes after rehydration in the protein secondary structure and peptidoglycan were investigated by infrared spectroscopy. Complementary cultivability measurements were performed by running dehydration-rehydration with combinations of NaCl (3-0.01%), distilled water, city water and PBS. The main results show that cell membrane permeability and cell envelope were greatly altered during dehydration in PBS at 68% RH followed by rapid rehydration. This damage led cells to recover only 67% of their initial volume after rehydration. Moreover, the most efficient way to destroy cells was dehydration and rehydration in city water. Our study indicates that rehydration of dried, sullied foods on surfaces may improve current cleaning procedures in the food industry.

Effect of devitrification on the survival and resistance of dried Saccharomyces cerevisiae yeast.

Yeasts are anhydrobiotes that accumulate large amounts of trehalose, which is involved in the vitrification of the cytoplasm during drastic desiccation. The effect of devitrification, which can be induced by the transient exposure of desiccated yeasts to increased humidity or elevated temperature, on the survival of yeast has been studied. A glass transition temperature (Tg)/water activity (aw) diagram of yeast was constructed based on differential scanning calorimetry analysis. The survival rate of yeasts that were equilibrated at different relative humidities (RHs) and temperature values over their Tg range was measured. The results revealed a long period of cell preservation at an intermediate RH (55%), with 100% survival observed after 3 months, a loss of 1.24 log colony-forming units/g recorded after 1 year at 25 °C and full preservation of viability at 75 °C for 60 min and at 100 °C and 12% RH for up to 10 min. These findings led us to conclude that dried yeast can resist low or intermediate RH values and elevated temperatures in the devitrified state. Considering the thermal and humidity fluctuations occurring in the yeast environments, we hypothesized that the supercooled state, which occurs immediately above the Tg after rehydration or heating, is a protective state that is involved in the persistence of yeasts at intermediate humidity levels. KEY POINTS: • Yeast survival for months in a supercooled state is observed at room temperature. • Dried yeasts survive a 10-min exposure to 100 °C in the supercooled state. • The supercooled state is suitable for yeast preservation.

Antioxidant Properties of Ergosterol and Its Role in Yeast Resistance to Oxidation.

Although the functions and structural roles of sterols have been the subject of numerous studies, the reasons for the diversity of sterols in the different eukaryotic kingdoms remain unclear. It is thought that the specificity of sterols is linked to unidentified supplementary functions that could enable organisms to be better adapted to their environment. Ergosterol is accumulated by late branching fungi that encounter oxidative perturbations in their interfacial habitats. Here, we investigated the antioxidant properties of ergosterol using in vivo, in vitro, and in silico approaches. The results showed that ergosterol is involved in yeast resistance to tert-butyl hydroperoxide and protects lipids against oxidation in liposomes. A computational study based on quantum chemistry revealed that this protection could be related to its antioxidant properties operating through an electron transfer followed by a proton transfer mechanism. This study demonstrates the antioxidant role of ergosterol and proposes knowledge elements to explain the specific accumulation of this sterol in late branching fungi. Ergosterol, as a natural antioxidant molecule, could also play a role in the incompletely understood beneficial effects of some mushrooms on health.

Increased xerotolerance of Saccharomyces cerevisiae during an osmotic pressure ramp over several generations.

Although mechanisms involved in response of Saccharomyces cerevisiae to osmotic challenge are well described for low and sudden stresses, little is known about how cells respond to a gradual increase of the osmotic pressure (reduced water activity; aw ) over several generations as it could encounter during drying in nature or in food processes. Using glycerol as a stressor, we propagated S. cerevisiae through a ramp of the osmotic pressure (up to high molar concentrations to achieve testing-to-destruction) at the rate of 1.5 MPa day-1 from 1.38 to 58.5 MPa (0.990-0.635 aw ). Cultivability (measured at 1.38 MPa and at the harvest osmotic pressure) and glucose consumption compared with the corresponding sudden stress showed that yeasts were able to grow until about 10.5 MPa (0.926 aw ) and to survive until about 58.5 MPa, whereas glucose consumption occurred until 13.5 MPa (about 0.915 aw ). Nevertheless, the ramp conferred an advantage since yeasts harvested at 10.5 and 34.5 MPa (0.778 aw ) showed a greater cultivability than glycerol-shocked cells after a subsequent shock at 200 MPa (0.234 aw ) for 2 days. FTIR analysis revealed structural changes in wall and proteins in the range 1.38-10.5 MPa, which would be likely to be involved in the resistance at extreme osmotic pressure.

Increased Survival of Lactococcus lactis Strains Subjected to Freeze-Drying after Cultivation in an Acid Medium: Involvement of Membrane Fluidity Cultivation in Acid Medium to Improve Bacterial Survival of Freeze-Drying.

RESEARCH BACKGROUND: Freeze-drying is the most widely used dehydration process in the food industry for the stabilization of bacteria. Studies have shown the effectiveness of an acid prestress in increasing the resistance of lactic acid bacteria to freeze-drying. Adaptation of bacteria to an acid stress is based on maintaining the properties of the plasma membrane. Indeed, the fatty acid composition of the membrane of lactic acid bacteria is often changed after an acid prestress. However, few studies have measured membrane fluidity after an acid stress during lactic acid bacterial strain cultivation. EXPERIMENTAL APPROACH: In order to use two pH profiles, the strains Lactococcus lactis NCDO 712 and NZ9000 were cultivated in two media, without any pH control. The two pH profiles obtained were representative of the initial medium composition, medium buffering properties and strain metabolism. Absorbance at 600 nm and pH were measured during bacterial cultivation. Then, the two strains were freeze-dried and their survival rates determined. Membrane fluidity was evaluated by fluorescence anisotropy measurements using a spectrofluorometer. RESULTS AND CONCLUSIONS: Cultivation under more acidic conditions significantly increased the survival during freeze-drying (p<0.05, ANOVA) of both strains. Moreover, in both strains of L. lactis, a more acidic condition during cultivation significantly increased membrane fluidity (p<0.05, ANOVA). Our results revealed that cultivation under such conditions, fluidifies the membrane and allows a better survival during freeze-drying of the two L. lactis strains. A more fluid membrane can facilitate membrane deformation and lateral reorganization of membrane components, critical for the maintenance of cellular integrity during dehydration and rehydration. NOVELTY AND SCIENTIFIC CONTRIBUTION: A better understanding of the involvement of membrane properties, especially of membrane fluidity, in bacterial resistance to dehydration is provided in this study.

Intestinal release of biofilm-like microcolonies encased in calcium-pectinate beads increases probiotic properties of Lacticaseibacillus paracasei.

In this study, we show that calcium pectinate beads (CPB) allow the formation of 20 µm spherical microcolonies of the probiotic bacteria Lacticaseibacillus paracasei (formerly designated as Lactobacillus paracasei) ATCC334 with a high cell density, reaching more than 10 log (CFU/g). The bacteria within these microcolonies are well structured and adhere to a three-dimensional network made of calcium-pectinate through the synthesis of extracellular polymeric substances (EPS) and thus display a biofilm-like phenotype, an attractive property for their use as probiotics. During bacterial development in the CPB, a coalescence phenomenon arises between neighboring microcolonies accompanied by their peripheral spatialization within the bead. Moreover, the cells of L. paracasei ATCC334 encased in these pectinate beads exhibit increased resistance to acidic stress (pH 1.5), osmotic stress (4.5 M NaCl), the freeze-drying process and combined stresses, simulating the harsh conditions encountered in the gastrointestinal (GI) tract. In vivo, the oral administration of CPB-formulated L. paracasei ATCC334 in mice demonstrated that biofilm-like microcolonies are successfully released from the CPB matrix in the colonic environment. In addition, these CPB-formulated probiotic bacteria display the ability to reduce the severity of a DSS-induced colitis mouse model, with a decrease in colonic mucosal injuries, less inflammation, and reduced weight loss compared to DSS control mice. To conclude, this work paves the way for a new form of probiotic administration in the form of biofilm-like microcolonies with enhanced functionalities.

Identification and transcriptional profile of Lactobacillus paracasei genes involved in the response to desiccation and rehydration.

Lactobacillus paracasei is able to persist in a variety of natural and technological environments despite physico-chemical perturbations, in particular alternations between desiccation and rehydration. However, the way in which it adapts to hydric fluctuations and the genetic determinants involved are not clearly understood. To identify the genes involved in adaptation to desiccation, an annotated library of L. paracasei random transposon mutants was screened for viability after desiccation (25% relative humidity, 25 °C). We found 16 genes that have not been described as being involved in this response. Most of them are linked to either the transport of molecules or to cell wall structure and function. Our screening also identified genes encoding DNA related enzymes and an alarmone necessary for L. paracasei survival. Subsequently, the expression of the identified genes was measured at five stages of the dehydration-rehydration process to decipher the chronology of genetic mechanisms. They were classified into four different transcriptional profiles: genes upregulated during both desiccation and rehydration phases, genes upregulated during the desiccation phase only, genes downregulated during both desiccation and rehydration and genes downregulated only during the rehydration stage. Thus, genetic response to hydric fluctuations seems to occur during desiccation and can continue or not during rehydration. The genes identified should contribute to improve the stabilization of Lactobacillus starters in dry state.

Collisional mechanism of ligand release by Bombyxmori JHBP, a member of the TULIP / Takeout family of lipid transporters.

Juvenile hormones (JHs) regulate important processes in insects, such as postembryonic development and reproduction. In the hemolymph of Lepidoptera, these lipophilic sesquiterpenic hormones are transported from their site of synthesis to target tissues by high affinity carriers, the juvenile hormone binding proteins (JHBPs). Lepidopteran JHBPs belong to a recently uncovered, yet very ancient family of proteins sharing a common lipid fold (TULIP domain) and involved in shuttling various lipid ligands. One important, but poorly understood aspect of JHs action, is the mechanism of hormone transfer to or through the plasma membranes of target cells. Since many membrane-active peptides and proteins, such as the pore-forming bacterial toxins, are activated by low pH or interaction with phospholipid membranes, we have examined the effect of these factors on JH binding by JHBPs. The affinity of Bombyx mori and Manduca sexta JHBPs for JH III was determined by the DCC assay, equilibrium dialysis, and isothermal titration calorimetry, and found to be greatly reduced at low pH, in agreement with previous observations. Loss of binding was accompanied by changes in fluorescence and near-UV CD spectra, indicating significant changes in protein structure in the environment of aromatic residues. The apparent dissociation rate constant (koff) of the JHBP-JH III complex was greater at acidic pH, suggesting that low pH favors ligand release by opening of the binding pocket. The affinity of recombinant B. mori JHBP (rBmJHBP) was also decreased in the presence of anionic phospholipid vesicles. Measurements of steady-state fluorescence anisotropy with the lipophilic probe TMA-DPH demonstrated that rBmJHBP specifically interacts with anionic membranes. These results suggest the existence of a collisional mechanism for ligand release that may be important for delivery of JHs to the target cells, and could be relevant to the function of related members of this emerging family of lipid-transport proteins.

Efficient stabilisation of curcumin microencapsulated into yeast cells via osmoporation.

This study proposes the investigation of curcumin encapsulation into Saccharomyces cerevisiae cells through osmoporation as an efficient way of increasing curcumin stability. The influence of three process parameters (cell, ethanol and curcumin concentrations) on the encapsulation process was evaluated, and the obtained biocapsules were characterised for physical and photochemical stabilisation. Results showed that encapsulation efficiency was favoured by the increase of cells/curcumin ratio and ethanol concentration up to 60%. Differential scanning calorimetry (DSC) curves revealed that yeast encapsulation delayed the curcumin melting point up to 207 °C. Encapsulated curcumin retained over 80% of antioxidant activity after thermal treatment (150 °C) and over 70% after a 50-day exposure to artificial light. Photochemical stability of yeast-encapsulated curcumin was increased by 5.7-fold, and half-life time reached 181 days under illumination conditions. Overall, osmoporation-produced yeast biocapsules confirmed the versatility of osmoporation as an encapsulation technique and successfully improved curcumin stability.

Comparison of the antioxidant property of acerola extracts with synthetic antioxidants using an in vivo method with yeasts.

In this study, we compared the antioxidant activity of ripe and unripe acerola extracts with synthetic antioxidants (BHA and BHT). This activity was assessed by classical approaches (DPPH and ABTS) and by an in vivo method using yeasts. Acerola extracts contain phenolic compounds and ascorbic acid that exhibit radical scavenger capacity and reducing power. The results obtained with yeasts revealed that the acerola extracts and BHT either acted as antioxidants or presented no activity depending on the nature of the oxidant molecule used. BHA decreased yeast resistance to oxidative treatments and also showed deleterious effects even when oxidative treatments were not applied. The unripe acerola was the most efficient antioxidant in the in vitro experiments but not necessarily in the in vivo assays, showing the weakness of in vitro systems in predicting antioxidant responses for biological purposes. BHA presented cell damaging effects even in the absence of oxidizing reagents.